Polyhedra¶
In this module, a polyhedron is a convex (possibly unbounded) set in Euclidean space cut out by a finite set of linear inequalities and linear equations. Note that the dimension of the polyhedron can be less than the dimension of the ambient space. There are two complementary representations of the same data:
 H(alfspace/Hyperplane)representation
This describes a polyhedron as the common solution set of a finite number of
 linear inequalities \(A \vec{x} + b \geq 0\), and
 linear equations \(C \vec{x} + d = 0\).
 V(ertex)representation
The other representation is as the convex hull of vertices (and rays and lines to all for unbounded polyhedra) as generators. The polyhedron is then the Minkowski sum
\[P = \text{conv}\{v_1,\dots,v_k\} + \sum_{i=1}^m \RR_+ r_i + \sum_{j=1}^n \RR \ell_j\]where
 vertices \(v_1\), \(\dots\), \(v_k\) are a finite number of points. Each vertex is specified by an arbitrary vector, and two points are equal if and only if the vector is the same.
 rays \(r_1\), \(\dots\), \(r_m\) are a finite number of directions (directions of infinity). Each ray is specified by a nonzero vector, and two rays are equal if and only if the vectors are the same up to rescaling with a positive constant.
 lines \(\ell_1\), \(\dots\), \(\ell_n\) are a finite number of unoriented directions. In other words, a line is equivalent to the set \(\{r, r\}\) for a ray \(r\). Each line is specified by a nonzero vector, and two lines are equivalent if and only if the vectors are the same up to rescaling with a nonzero (possibly negative) constant.
When specifying a polyhedron, you can input a nonminimal set of inequalities/equations or generating vertices/rays/lines. The nonminimal generators are usually called points, nonextremal rays, and nonextremal lines, but for our purposes it is more convenient to always talk about vertices/rays/lines. Sage will remove any superfluous representation objects and always return a minimal representation. For example, \((0,0)\) is a superfluous vertex here:
sage: triangle = Polyhedron(vertices=[(0,2), (1,0), (1,0), (0,0)])
sage: triangle.vertices()
(A vertex at (1, 0), A vertex at (1, 0), A vertex at (0, 2))
See also
If one only needs to keep track of a system of linear system of inequalities, one should also consider the class for mixed integer linear programming.
Unbounded Polyhedra¶
A polytope is defined as a bounded polyhedron. In this case, the minimal representation is unique and a vertex of the minimal representation is equivalent to a 0dimensional face of the polytope. This is why one generally does not distinguish vertices and 0dimensional faces. But for nonbounded polyhedra we have to allow for a more general notion of “vertex” in order to make sense of the Minkowsi sum presentation:
sage: half_plane = Polyhedron(ieqs=[(0,1,0)])
sage: half_plane.Hrepresentation()
(An inequality (1, 0) x + 0 >= 0,)
sage: half_plane.Vrepresentation()
(A line in the direction (0, 1), A ray in the direction (1, 0), A vertex at (0, 0))
Note how we need a point in the above example to anchor the ray and line. But any point on the boundary of the halfplane would serve the purpose just as well. Sage picked the origin here, but this choice is not unique. Similarly, the choice of ray is arbitrary but necessary to generate the halfplane.
Finally, note that while rays and lines generate unbounded edges of the polyhedron they are not in a onetoone correspondence with them. For example, the infinite strip has two infinite edges (1faces) but only one generating line:
sage: strip = Polyhedron(vertices=[(1,0),(1,0)], lines=[(0,1)])
sage: strip.Hrepresentation()
(An inequality (1, 0) x + 1 >= 0, An inequality (1, 0) x + 1 >= 0)
sage: strip.lines()
(A line in the direction (0, 1),)
sage: strip.faces(1)
(<0,1>, <0,2>)
sage: for face in strip.faces(1):
....: print("{} = {}".format(face, face.as_polyhedron().Vrepresentation()))
<0,1> = (A line in the direction (0, 1), A vertex at (1, 0))
<0,2> = (A line in the direction (0, 1), A vertex at (1, 0))
EXAMPLES:
sage: trunc_quadr = Polyhedron(vertices=[[1,0],[0,1]], rays=[[1,0],[0,1]])
sage: trunc_quadr
A 2dimensional polyhedron in ZZ^2 defined as the convex hull of 2 vertices and 2 rays
sage: v = next(trunc_quadr.vertex_generator()) # the first vertex in the internal enumeration
sage: v
A vertex at (0, 1)
sage: v.vector()
(0, 1)
sage: list(v)
[0, 1]
sage: len(v)
2
sage: v[0] + v[1]
1
sage: v.is_vertex()
True
sage: type(v)
<class 'sage.geometry.polyhedron.representation.Vertex'>
sage: type( v() )
<type 'sage.modules.vector_integer_dense.Vector_integer_dense'>
sage: v.polyhedron()
A 2dimensional polyhedron in ZZ^2 defined as the convex hull of 2 vertices and 2 rays
sage: r = next(trunc_quadr.ray_generator())
sage: r
A ray in the direction (0, 1)
sage: r.vector()
(0, 1)
sage: list( v.neighbors() )
[A ray in the direction (0, 1), A vertex at (1, 0)]
Inequalities \(A \vec{x} + b \geq 0\) (and, similarly, equations) are
specified by a list [b, A]
:
sage: Polyhedron(ieqs=[(0,1,0),(0,0,1),(1,1,1)]).Hrepresentation()
(An inequality (1, 1) x + 1 >= 0,
An inequality (1, 0) x + 0 >= 0,
An inequality (0, 1) x + 0 >= 0)
See Polyhedron()
for a detailed description of all possible ways
to construct a polyhedron.
Base Rings¶
The base ring of the polyhedron can be specified by the base_ring
optional keyword argument. If not specified, a suitable common base
ring for all coordinates/coefficients will be chosen
automatically. Important cases are:
base_ring=QQ
uses a fast implementation for exact rational numbers.base_ring=ZZ
is similar toQQ
, but the resulting polyhedron object will have extra methods for lattice polyhedra.base_ring=RDF
uses floating point numbers, this is fast but susceptible to numerical errors.
Polyhedra with symmetries often are defined over some algebraic field
extension of the rationals. As a simple example, consider the
equilateral triangle whose vertex coordinates involve \(\sqrt{3}\). An
exact way to work with roots in Sage is the Algebraic Real Field
sage: triangle = Polyhedron([(0,0), (1,0), (1/2, sqrt(3)/2)], base_ring=AA)
sage: triangle.Hrepresentation()
(An inequality (1, 0.5773502691896258?) x + 1 >= 0,
An inequality (1, 0.5773502691896258?) x + 0 >= 0,
An inequality (0, 1.154700538379252?) x + 0 >= 0)
Without specifying the base_ring
, the sqrt(3)
would be a
symbolic ring element and, therefore, the polyhedron defined over the
symbolic ring. This is currently not supported as SR is not exact:
sage: Polyhedron([(0,0), (1,0), (1/2, sqrt(3)/2)])
Traceback (most recent call last):
...
ValueError: the only allowed inexact ring is 'RDF' with backend 'cdd'
sage: SR.is_exact()
False
Even faster than all algebraic real numbers (the field AA
) is
to take the smallest extension field. For the equilateral
triangle, that would be:
sage: K.<sqrt3> = NumberField(x^2  3, embedding=AA(3)**(1/2))
sage: Polyhedron([(0,0), (1,0), (1/2, sqrt3/2)])
A 2dimensional polyhedron in (Number Field in sqrt3 with defining
polynomial x^2  3)^2 defined as the convex hull of 3 vertices
Warning
Be careful when you construct polyhedra with floating point numbers. The only available backend for such computation is \(cdd\) which uses machine floating point numbers which have have limited precision. If the input consists of floating point numbers and the \(base_ring\) is not specified, the base ring is set to be the \(RealField\) with the precision given by the minimal bit precision of the input. Then, if the obtained minimum is 53 bits of precision, the constructor converts automatically the base ring to \(RDF\). Otherwise, it returns an error:
sage: Polyhedron(vertices = [[1.12345678901234, 2.12345678901234]])
A 0dimensional polyhedron in RDF^2 defined as the convex hull of 1 vertex
sage: Polyhedron(vertices = [[1.12345678901234, 2.123456789012345]])
A 0dimensional polyhedron in RDF^2 defined as the convex hull of 1 vertex
sage: Polyhedron(vertices = [[1.123456789012345, 2.123456789012345]])
Traceback (most recent call last):
...
ValueError: the only allowed inexact ring is 'RDF' with backend 'cdd'
The strongly suggested method to input floating point numbers is to specify the \(base_ring\) to be \(RDF\):
sage: Polyhedron(vertices = [[1.123456789012345, 2.123456789012345]], base_ring=RDF)
A 0dimensional polyhedron in RDF^2 defined as the convex hull of 1 vertex
See also
Base classes¶
Depending on the chosen base ring, a specific class is used to represent the polyhedron object.
See also
The most important base class is Base class for polyhedra from which other base classes and backends inherit.
Backends¶
There are different backends available to deal with polyhedron objects.
See also
Note
Depending on the backend used, it may occur that different methods are available or not.
Appendix¶
REFERENCES:
Komei Fukuda’s FAQ in Polyhedral Computation
AUTHORS:
 Marshall Hampton: first version, bug fixes, and various improvements, 2008 and 2009
 Arnaud Bergeron: improvements to triangulation and rendering, 2008
 Sebastien Barthelemy: documentation improvements, 2008
 Volker Braun: refactoring, handle noncompact case, 2009 and 2010
 Andrey Novoseltsev: added lattice_from_incidences, 2010
 Volker Braun: rewrite to use PPL instead of cddlib, 2011
 Volker Braun: Add support for arbitrary subfields of the reals

sage.geometry.polyhedron.constructor.
Polyhedron
(vertices=None, rays=None, lines=None, ieqs=None, eqns=None, ambient_dim=None, base_ring=None, minimize=True, verbose=False, backend=None)¶ Construct a polyhedron object.
You may either define it with vertex/ray/line or inequalities/equations data, but not both. Redundant data will automatically be removed (unless
minimize=False
), and the complementary representation will be computed.INPUT:
vertices
– list of point. Each point can be specified as any iterable container ofbase_ring
elements. Ifrays
orlines
are specified but novertices
, the origin is taken to be the single vertex.rays
– list of rays. Each ray can be specified as any iterable container ofbase_ring
elements.lines
– list of lines. Each line can be specified as any iterable container ofbase_ring
elements.ieqs
– list of inequalities. Each line can be specified as any iterable container ofbase_ring
elements. An entry equal to[1,7,3,4]
represents the inequality \(7x_1+3x_2+4x_3\geq 1\).eqns
– list of equalities. Each line can be specified as any iterable container ofbase_ring
elements. An entry equal to[1,7,3,4]
represents the equality \(7x_1+3x_2+4x_3= 1\).base_ring
– a subfield of the reals implemented in Sage. The field over which the polyhedron will be defined. ForQQ
and algebraic extensions, exact arithmetic will be used. ForRDF
, floating point numbers will be used. Floating point arithmetic is faster but might give the wrong result for degenerate input.ambient_dim
– integer. The ambient space dimension. Usually can be figured out automatically from the H/Vrepresentation dimensions.backend
– string orNone
(default). The backend to use. Valid choices are'cdd'
: use cdd (backend_cdd
) with \(\QQ\) or \(\RDF\) coefficients depending onbase_ring
.'normaliz'
: use normaliz (backend_normaliz
) with \(\ZZ\) or \(\QQ\) coefficients depending onbase_ring
.'polymake'
: use polymake (backend_polymake
) with \(\QQ\), \(\RDF\) orQuadraticField
coefficients depending onbase_ring
.'ppl'
: use ppl (backend_ppl
) with \(\ZZ\) or \(\QQ\) coefficients depending onbase_ring
.'field'
: use python implementation (backend_field
) for any field
Some backends support further optional arguments:
minimize
– boolean (default:True
). Whether to immediately remove redundant H/Vrepresentation data. Currently not used.verbose
– boolean (default:False
). Whether to print verbose output for debugging purposes. Only supported by the cdd and normaliz backends.
OUTPUT:
The polyhedron defined by the input data.
EXAMPLES:
Construct some polyhedra:
sage: square_from_vertices = Polyhedron(vertices = [[1, 1], [1, 1], [1, 1], [1, 1]]) sage: square_from_ieqs = Polyhedron(ieqs = [[1, 0, 1], [1, 1, 0], [1, 0, 1], [1, 1, 0]]) sage: list(square_from_ieqs.vertex_generator()) [A vertex at (1, 1), A vertex at (1, 1), A vertex at (1, 1), A vertex at (1, 1)] sage: list(square_from_vertices.inequality_generator()) [An inequality (1, 0) x + 1 >= 0, An inequality (0, 1) x + 1 >= 0, An inequality (1, 0) x + 1 >= 0, An inequality (0, 1) x + 1 >= 0] sage: p = Polyhedron(vertices = [[1.1, 2.2], [3.3, 4.4]], base_ring=RDF) sage: p.n_inequalities() 2
The same polyhedron given in two ways:
sage: p = Polyhedron(ieqs = [[0,1,0,0],[0,0,1,0]]) sage: p.Vrepresentation() (A line in the direction (0, 0, 1), A ray in the direction (1, 0, 0), A ray in the direction (0, 1, 0), A vertex at (0, 0, 0)) sage: q = Polyhedron(vertices=[[0,0,0]], rays=[[1,0,0],[0,1,0]], lines=[[0,0,1]]) sage: q.Hrepresentation() (An inequality (1, 0, 0) x + 0 >= 0, An inequality (0, 1, 0) x + 0 >= 0)
Finally, a more complicated example. Take \(\mathbb{R}_{\geq 0}^6\) with coordinates \(a, b, \dots, f\) and
 The inequality \(e+b \geq c+d\)
 The inequality \(e+c \geq b+d\)
 The equation \(a+b+c+d+e+f = 31\)
sage: positive_coords = Polyhedron(ieqs=[ ....: [0, 1, 0, 0, 0, 0, 0], [0, 0, 1, 0, 0, 0, 0], [0, 0, 0, 1, 0, 0, 0], ....: [0, 0, 0, 0, 1, 0, 0], [0, 0, 0, 0, 0, 1, 0], [0, 0, 0, 0, 0, 0, 1]]) sage: P = Polyhedron(ieqs=positive_coords.inequalities() + ( ....: [0,0,1,1,1,1,0], [0,0,1,1,1,1,0]), eqns=[[31,1,1,1,1,1,1]]) sage: P A 5dimensional polyhedron in QQ^6 defined as the convex hull of 7 vertices sage: P.dim() 5 sage: P.Vrepresentation() (A vertex at (31, 0, 0, 0, 0, 0), A vertex at (0, 0, 0, 0, 0, 31), A vertex at (0, 0, 0, 0, 31, 0), A vertex at (0, 0, 31/2, 0, 31/2, 0), A vertex at (0, 31/2, 31/2, 0, 0, 0), A vertex at (0, 31/2, 0, 0, 31/2, 0), A vertex at (0, 0, 0, 31/2, 31/2, 0))
Regular icosahedron, centered at \(0\) with edge length \(2\), with vertices given by the cyclic shifts of \((0, \pm 1, \pm (1+\sqrt(5))/2)\), cf. Wikipedia article Regular_icosahedron. It needs a number field:
sage: R0.<r0> = QQ[] sage: R1.<r1> = NumberField(r0^25, embedding=AA(5)**(1/2)) sage: grat = (1+r1)/2 sage: v = [[0, 1, grat], [0, 1, grat], [0, 1, grat], [0, 1, grat]] sage: pp = Permutation((1, 2, 3)) sage: icosah = Polyhedron([(pp^2).action(w) for w in v] ....: + [pp.action(w) for w in v] + v, base_ring=R1) sage: len(icosah.faces(2)) 20
When the input contains elements of a Number Field, they require an embedding:
sage: K = NumberField(x^22,'s') sage: s = K.0 sage: L = NumberField(x^32,'t') sage: t = L.0 sage: P = Polyhedron(vertices = [[0,s],[t,0]]) Traceback (most recent call last): ... ValueError: invalid base ring
Note
 Once constructed, a
Polyhedron
object is immutable.  Although the option
base_ring=RDF
allows numerical data to be used, it might not give the right answer for degenerate input data  the results can depend upon the tolerance setting of cdd.
See also